Dell EMC PowerEdge R740 Скачать руководство пользователя страница 11

Страница: 11 / 172

Table 1. Features available on the front of the system

Item

Ports, panels and slots

Icon

Description

Left control panel

N/A

Contains system health and system ID, status LED and optional
iDRAC Quick Sync 2 (wireless).

Hard drives

N/A

Enable you to install hard drives that are supported on your system.

For more information about hard drives, see the Technical

specifications section.

Optical drive (optional)

N/A

Enables you to retrieve and store data on optical discs such as

compact discs (CD) and digital versatile discs (DVD). For more

information, see the Technical specifications section.

USB 3.0 port (optional)

The USB ports are 9-pin, 3.0-compliant. These ports enable you to

connect USB devices to the system.

Right control panel

N/A

Contains the power button, VGA port, iDRAC Direct micro USB port,
and two USB 2.0 ports.

Information tag

N/A

The Information Tag is a slide-out label panel that contains system

information such as Service Tag, NIC, MAC address, and so on. If you

have opted for secure default access to iDRAC, the Information tag

also contains the iDRAC secure default password.

Содержание EMC PowerEdge R740













































































































































































Результаты поиска

Содержание EMC PowerEdge R740

Отзывы:

Dell EMC PowerEdge R740, Инструкция по установке и обслуживанию, Страница: 11 / 172

Результаты поиска

Содержание EMC PowerEdge R740

Отзывы: