background image

Dell™ Latitude™ E5400 and E5500 Service Manual

 

 

 

 

Notes, Notices, and Cautions 

If you purchased a DELL™ n Series computer, any references in this document to Microsoft

®

 Windows

®

 operating systems are not applicable.

 

Information in this document is subject to change without notice. 

© 2008 Dell Inc. All rights reserved.

 

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell, Latitude,

 

ExpressCharge

, and the 

DELL

 logo are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc., and is 

used by Dell under license; 

Intel

 and 

Celeron 

are registered trademarks, and

 Core

 is a trademark of Intel Corporation in the U.S. and other countries; 

Blu-ray Disc

 is a trademark of 

the Blu-ray Disc Association; M

icrosoft

Windows,

 Windows Vista, 

and Windows Vista start button logo

 are either trademarks or registered trademarks of Microsoft Corporation in the 

United States and/or other countries.  

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Models PP32LA and PP32LB

 

May 2008     Rev. A00

 

Troubleshooting

Keyboard

Working on Your Computer

LED Dashboard

Bottom of the Base Assembly

Display

Hard Drive

Optical Drive

Wireless Local Area Network (WLAN) Card

Palm Rest

Modem Card

System Board Assembly

Fan

I/O Card

Processor Heat Sink

Speaker Assembly

Processor Module

Coin-Cell Battery

Memory

Flashing the BIOS

Hinge Cover

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

CAUTION: 

A CAUTION indicates potential for property damage, personal injury, or death. 

Содержание E5400 - Latitude - Core 2 Duo 2.4 GHz










































































Отзывы: