Dell DX6112-SN Скачать руководство пользователя страница 19

Страница: 19 / 125

System Setup Main Screen

NOTE: Press <Alt><F> to reset the BIOS or UEFI settings to their default settings.

Menu Item

Description

System BIOS

This option is used to view and configure BIOS settings.

iDRAC Settings

This option is used to view and configure iDRAC settings.

Device Settings

This option is used to view and configure device settings.

System BIOS Screen

NOTE: The options for System Setup change based on the system configuration.

NOTE: System Setup defaults are listed under their respective options in the following sections, where applicable.

Menu Item

Description

System Information

Displays information about the system such as the system model name, BIOS version, Service
Tag, and so on.

Memory Settings

Displays information and options related to installed memory.

Processor Settings

Displays information and options related to the processor such as speed, cache size, and so
on.

Boot Settings

Displays options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS
boot settings.

Integrated Devices

Displays options to enable or disable integrated device controllers and ports, and to specify
related features and options.

Serial Communication Displays options to enable or disable the serial ports and specify related features and options.

System Profile
Settings

Displays options to change the processor power management settings, memory frequency,
and so on.

System Security

Displays options to configure the system security settings like, system password, setup
password, TPM security, and so on. It also enables or disables support for local BIOS update,
the power and NMI buttons on the system.

Miscellaneous
Settings

Displays options to change the system date, time, and so on.

System Information Screen

Menu Item

Description

System Model Name Displays the system model name.

System BIOS Version Displays the BIOS version installed on the system.

System Service Tag

Displays the system Service Tag.

Содержание DX6112-SN






























































































































Результаты поиска

Содержание DX6112-SN

Отзывы:

Похожие инструкции для DX6112-SN

Бренды по названию

Популярные бренды

Dell DX6112-SN, Руководство пользователя

Результаты поиска

Содержание DX6112-SN

Отзывы:

Похожие инструкции для DX6112-SN

Бренды по названию

Популярные бренды