Dell DX6112-SN Скачать руководство пользователя страница 114

Страница: 114 / 125

Error Code

Message Information

MEM0001

Message

Multi-bit memory errors detected on a memory device at location(s)
<

location

Details

The memory module has encountered an uncorrectable error. System
performance may be degraded. The operating system and/or
applications may fail as a result.

Action

Re-seat the memory modules. If the issue persists, see

Getting Help

MEM0007

Message

Unsupported memory configuration; check memory device at location
<

location

Details

The memory may not be seated correctly, misconfigured, or has
failed. Memory size is reduced.

Action

Check the memory configuration. Re-seat the memory modules. If the
issue persists, see

Getting Help

MEM0701

Message

Correctable memory error rate exceeded for <

location

Details

The memory may not be operational. This an early indicator of a
possible future uncorrectable error.

Action

Re-seat the memory modules. If the issue persists, see

Getting Help

MEM0702

Message

Correctable memory error rate exceeded for <

location

Details

The memory may not be operational. This an early indicator of a
possible future uncorrectable error.

Action

Re-seat the memory modules. If the issue persists, see

Getting Help

MEM1205

Message

Memory mirror redundancy is lost. Check memory device at
location(s) <

location

Details

The memory may not be seated correctly, misconfigured, or has
failed.

Action

Check the memory configuration. Re-seat the memory modules. If the
issue persists, see

Getting Help

MEM1208

Message

Memory spare redundancy is lost. Check memory device at location
<

location

Details

Memory sparing is no longer available.

Action

Re-seat the memory modules. If the issue persists, see

Getting Help

114

Содержание DX6112-SN






























































































































Результаты поиска

Содержание DX6112-SN

Отзывы:

Dell DX6112-SN, Руководство пользователя, Страница: 114 / 125

Результаты поиска

Содержание DX6112-SN

Отзывы: