Dell D14S003 Скачать руководство пользователя страница 50

Страница: 50 / 56

Table 3. System setup options—Advanced menu

Advanced

Advanced BIOS Features

Intel SpeedStep Technology

Enables you to enable or disable Intel Speedstep Technology.

Default: Enabled

NOTE:

If enabled, the processor clock speed and core

voltage are adjusted dynamically based on the processor
load.

Virtualization

Enables you to enable or disable Intel Virtualization Technology
feature for the processor.

VT for Direct I/O

Enables you to enable or disable Intel Virtualization Technology
feature for the Direct I/O.

Integrated NIC

Enables you to enable or disable the on-board LAN controller.

Default: Enabled

SATA Operation

Enables you to configure the operating mode of the integrated
SATA hard drive controller.

Default: AHCI

Adapter Warnings

Enables you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.

Default: Enabled

Intel Software Guard Extensions

Enable or disable Intel Software Guard Extensions.

Default: Software Controlled

Intel Software Guard Extensions allocated memory size

Displays the allocated memory size for Intel Software Guard
Extensions.

BIOS Recovery from Hard Drive

Enables you to enable or disable BIOS Recovery from hard
drive.

Default: Enabled

BIOS Auto-Recovery

Enable or disable BIOS Auto-Recovery.

Default: Disabled

Always Perform Integrity Check

Enable or disable Always Perform Integrity Check.

Default: Disabled

USB Configuration

Front USB Ports

Enables you to enable or disable the front USB ports.

Rear USB Ports

Enables you to enable or disable the rear USB ports.

Power Options

Wake Up by Integrated LAN

Enables the computer to be powered on by special LAN
signals.

AC Recovery

Sets what action the computer takes when power is restored.

Deep Sleep Control

Enables you to define the controls when Deep Sleep is
enabled.

USB Wake Support

Enables you to enable the USB devices to wake the computer
from Standby.

Numlock Key

Enables you to set the status of the Numlock key during boot
to On or Off.

System setup

Содержание D14S003

























































Результаты поиска

Содержание D14S003

Отзывы:

Похожие инструкции для D14S003

Бренды по названию

Популярные бренды

Dell D14S003, Руководство по обслуживанию

Результаты поиска

Содержание D14S003

Отзывы:

Похожие инструкции для D14S003

Бренды по названию

Популярные бренды