Dell D14S003, Руководство по обслуживанию

Страница: 23 / 56

Replacing the optical drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Topics:
• Procedure
• Post-requisites
Procedure
1. Align and snap the optical-drive bezel to the optical drive.
2. Align the screw holes on the optical-drive assembly with the screw holes on the drive cage.
3. Replace the three screws (M2xL2) that secure the optical-drive assembly to the drive cage.
4. Slide the drive cage into the slot on the chassis and snap it into place.
5. Align the screw hole on the drive cage with the screw hole on the chassis.
6. Replace the two screws (#6-32xL3.6) that secure the drive cage to the chassis.
7. Connect the data cables and power cables to the hard-drive assembly.
8. Connect the data cable and power cable to the optical-drive assembly.
Post-requisites
Replace the computer cover .
13
Replacing the optical drive 23