Replacing the 3.5-inch hard drive
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Topics:
•
•
Procedure
1. Slide the hard drive into the hard-drive bracket.
2. Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.
3. Replace the two screws (#6-32xL3.6) that secure the hard-drive bracket to the hard drive.
4. Turn the hard-drive assembly over.
5. Slide the hard-drive assembly into the drive cage.
6. Replace the two screws (#6-32xL6.35) that secure the hard-drive assembly to the drive cage.
7. Connect the power cable and data cable to the hard-drive assembly.
Post-requisites
Replace the
11
20
Replacing the 3.5-inch hard drive
Содержание D14S003
