Dell Chromebook 3400 Скачать руководство пользователя

Страница: 80 / 108

Troubleshooting

Basic troubleshooting

This page contains all the information for Dell basic troubleshooting

NOTE:

Refer to

Google Help Center

for the online troubleshooter.

NOTE:

Resetting

the Chromebook, also known as Powerwash, can be attempted before

Recovering

the Chromebook.

Recovering the Chromebook is the last resort.

Power issues

Table 5. Power issue

Power issues

Issue

Possible solutions

Chromebook would not Power On

If the Chromebook will not turn on, follow these steps:

Remove all external devices.
a

If the Chromebook starts, reconnect devices one at a

time while restarting the computer to figure out which

device is causing the problem. You are done.

If the Chromebook still does not start or exhibits the

same problem, do not reconnect anything, and continue

troubleshooting.

The battery life might be too low. Plug the Chromebook into

the AC adapter and let it charge for at least an hour and try

turning it on again.

NOTE:

When a new Chromebook is used for the

first time, the battery is still in shipping mode.

To resolve this issue, turn off the Chromebook

and plug in the AC adapter and turn on the

Chromebook again.

Depending on the Chromebook you have, you may see a

power indicator light close to the charging port. If you have let

the Chromebook charge and the light is not coming on,

perform a hard reset.

NOTE:

You can perform a hard reset by pressing

R Power.

Use a different AC adapter with the same power voltage.

Remove the AC adapter, and turn on with the battery power

only.

Troubleshooting

Содержание Chromebook 3400













































































































Результаты поиска

Содержание Chromebook 3400

Отзывы:

Похожие инструкции для Chromebook 3400

Бренды по названию

Популярные бренды

Dell Chromebook 3400, Руководство по обслуживанию

Результаты поиска

Содержание Chromebook 3400

Отзывы:

Похожие инструкции для Chromebook 3400

Бренды по названию

Популярные бренды