Installing DC Power Entry Modules
|
39
Status LED
The status LED indicates the condition of the PEM.
Removing a DC PEM
The left chassis PEM slot is labelled “0” and the right chassis PEM slot is labelled “1.” For full
redundancy, each PEM must be attached to a dedicated circuit breaker. For example, PEM “0” connects
to circuit breaker “0” and PEM “1” connects to circuit breaker “1.”
WARNING:
Prevent exposure and contact with hazardous voltages. Do not attempt to operate this system
with the safety cover removed.
Table 8-3. Status LED Descriptions
LED Display
Meaning
Description
Off
Off
No input voltage is present, or the circuit is turned
off.
Flashing Green
Over-Current Warning
The load current is above the warning level
threshold. This warning takes precedence over the
temperature warning.
Flashing Green
Over-Temperature Warning
The temperature is above the temperature warning
threshold.
Solid Green
On
The PEM is running normally.
Step
Task
1
Switch the Over Current Protector (located on the PEM front panel) to the
OFF
position.
2
Turn off the PEM. Ensure that the remote source is in the
OFF
position and that the PEM
Status
LED and
Pwr In
OK
LED are off.
3
Loosen the retaining screw and remove PEM safety cover (see
Figure 8-1
).
4
Disconnect cables attached to the PEM.
5
Slide the PEM out of the slot.
6
If you are not replacing the PEM, close the empty slot with a blank panels.
Содержание C300
