Dell BigIron RX-16, Руководство по установке

Страница: 217 / 240

BigIron RX Installation Guide 205
53-1001811-01
Port specifications
8
Port specifications
This section provides pin assignments for the following ports:
•
Management module’s Console port (serial connector)
•
Management module’s management port (RJ-45 unshielded twisted pair (UTP) connector)
Console port pin assignments
The Console port is a standard male DB-9 connector, as shown in Figure 90 . For information about
how you can use this port, refer to “Console port” on page 9.
FIGURE 90
Console port pin and signalling details
Most PC serial ports require a cable with a female DB-9 connector. However, terminal connections
will vary, requiring a cable with either a DB-9 or DB-25 connector, male or female.
Serial cable options between the BigIron RX Series chassis and a PC or terminal are shown in
Figure 91 .
NOTE
As indicated in Figure 90 and Figure 91 , some of the wires should not be connected. If you do
connect the wires that are labeled “Reserved”, you might get unexpected results with some
terminals.
5
9 6
1
Pin Assignment
DB-9 male
Pin Number Switch Signal
1 Reserved
2 TXD
(output)
3 RXD (input)
4 Reserved
5 GND
6 Reserved
7 CTS
(input)
8 RTS (output)
9 Reserved