Figure 27. Installing a drive into the drive carrier
Next steps
1.
.
2.
.
Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Prerequisites
1. Follow the safety guidelines listed in
.
2.
.
Steps
1. Remove the screws from the rails on the drive carrier.
NOTE:
If the 3.5-inch drive has Torx screw, use Torx 6 screwdriver to remove the drive from a 3.5-inch drive adapter.
2. Lift the 3.5-inch drive adapter out of the drive carrier.
Installing and removing system components
43
