Dell 5820 Скачать руководство пользователя страница 84

Страница: 84 / 96

Option

Description

Bios Recovery

BIOS Recovery from Hard Drive

—This option is set by default. Allows you to recover the corrupted BIOS

from a recovery file on the HDD or an external USB key.

BIOS Auto-Recovery

— Allows you to recover the BIOS automatically.

NOTE:

BIOS Recovery from Hard Drive field should be enabled.

Always Perform Integrity Check

—Performs integrity check on every boot.

System logs

Table 16. System Logs

Option

Description

BIOS events

Displays the system event log and allows you to clear the log.

•

Clear Log

This option is not set by default.

Advanced configurations

Table 17. Advanced configurations

Option

Description

Pcie LinkSpeed

Allows you to choose the Pcie linkspeed.

Click one of the following options:

•

Auto

—Default

•

Gen1

•

Gen2

SupportAssist system resolution

Table 18. SupportAssit System Resolution

Option

Description

Auto OS Recovery
Threshold

The

Auto OS Recovery Threshold

setup option controls the automatic boot flow for Support Assist

System Resolution Console and Dell OS Recovery tool.

Click one of the following options:

•

OFF

•

—Default

•

Updating the BIOS in Windows

It is recommended to update your BIOS (System Setup), when you replace the system board or if an update is available.

System Setup

Содержание 5820

































































































Результаты поиска

Содержание 5820

Отзывы:

Dell 5820, Руководство пользователя, Страница: 84 / 96

Результаты поиска

Содержание 5820

Отзывы: