Expansion card
Removing the expansion card
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
To remove the expansion card:
NOTE:
For expansion card with VGA power, disconnect the data or power cable connected to the expansion card.
a Press [1] and rotate the expansion card locking latch backward [2], to unlock the filler bracket.
b Lift the expansion card [3] from the PCIe slot on the system board.
Installing the expansion card
1
Align and place the expansion card to the PCIe slot on the system board.
2
Press it down so that it is securely seated on the slot.
NOTE:
For expansion card with VGA power, connect the data or power cable to the expansion card.
3
Rotate both the expansion card locking latch forward, on the filler bracket, to secure the expansion card to the system board.
4
Install the
.
38
Removing and installing components
Содержание 5820
