Dell 5820 Скачать руководство пользователя страница 74

Страница: 74 / 96

Option

Description

SATA Operation

Tower 5820

Allows you to configure the operating mode of the integrated SATA

hard-drive controller.

Click one of the following options:

•

Disabled

•

AHCI

•

RAID On

—Default

NOTE:

SATA is configured to support RAID

mode.

Drives

Tower 5820

Allows you to enable or disable various drives on board.

The options are:

•

MiniSAS PCIe SSD-0

•

SATA-0

•

SATA–2

•

SATA–4

•

ODD–0

•

MiniSAS PCIe SSD-1

•

SATA–1

•

SATA–3

•

SATA–5

•

ODD–1

All the options are set by default.

SMART Reporting

This field controls if the hard drive errors for the integrated drives

are reported during system startup. This technology is part of the

SMART(Self-Monitoring Analysis and Reporting Technology)

specification.

•

Enable SMART Reporting

This option is not set by default.

USB Configuration

Allows you to enable or disable the internal USB configuration.

The options are:

•

Enable USB Boot Support

•

Enable Front USB Ports

•

Enable Internal USB Ports

•

Enable USB 3.0 Controller

•

Enable Rear USB Ports

All the options are set by default.

Front USB Configuration

Allows you to enable/disable Front USB ports.

The options are:

•

USB3 Type A *

•

USB Type C port 2 (Right) *

•

USB Type C port 1 (Right) *

System Setup

Содержание 5820

































































































Результаты поиска

Содержание 5820

Отзывы:

Похожие инструкции для 5820

Бренды по названию

Популярные бренды

Dell 5820, Руководство пользователя

Результаты поиска

Содержание 5820

Отзывы:

Похожие инструкции для 5820

Бренды по названию

Популярные бренды