Installing input and output panel bracket
1
Insert the input and output(I/O) panel into the metal bracket.
2
Replace the screws to secure the I/O panel bracket to the I/O panel.
3
Install the:
a
b
c
d
e
4
Follow the procedure in
After working inside your computer
.
Intrusion switch
Removing the Intrusion switch
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the intrusion switch:
a Disconnect the intrusion cable [1] from the I/O module.
b Remove the screw [2] that secures the intrusion switch to the chassis.
c Lift the intrusion switch and remove it from the chassis.
32
Removing and installing components
Содержание 5820
