Dell 5210n Mono Laser Printer, Руководство по обслуживанию

Страница: 206 / 430

3-34
Service Manual
Toner fog or background shading
appears on the page.
• Check the print cartridge to make sure it is installed correctly.
• The
Toner Darkness
setting may be too dark. Change the
Toner
Darkness
setting in the Quality Menu.
• Replace the charge rolls.
• Replace the print cartridge.
Entire page is white. • Make sure the packaging material is removed from the print
cartridge.
• Check the print cartridge to be sure it is installed correctly.
• The toner may be low. To utilize the remaining toner, remove the
cartridge by gripping the handles with both hands. With the
cartridge arrows pointing downward, firmly shake the print
cartridge side-to-side and front-to-back several times to
redistribute the toner. Reinstall the cartridge and then press
.
Repeat this procedure multiple times until the print remains
faded. When the print remains faded replace the print cartridge.
Streaks appear on the page. • The toner may be low. To utilize the remaining toner, remove the
cartridge by gripping the handles with both hands. With the
cartridge arrows pointing downward, firmly shake the print
cartridge side-to-side and front-to-back several times to
redistribute the toner. Reinstall the cartridge and then press
.
Repeat this procedure multiple times until the print remains
faded. When the print remains faded replace the print cartridge.
• If you are using preprinted forms, make sure the ink can
withstand temperatures of 230°C (446°F).
Printing is too dark. • Change the
Toner Darkness
setting in the Quality menu.
• Change the
Brightness
setting in the Quality menu.
• Change the
Contrast
setting in the Quality menu.
Note:
Macintosh computer users should make sure the job lines per
inch (lpi) setting is not set too high in the software application.
Problem Action