Dell 5210n Mono Laser Printer, Руководство по обслуживанию

Страница: 188 / 430

3-16
Service Manual
Sensor Test (high capacity output stacker)
1.
Select
Sensor Test
from OUTPUT BIN TESTS.
2.
Select
Output Bin x
(
x
=number of the output option to be tested).
The following screen is displayed:
HC Bin x TP=OPpassThru=Open Full=Open NearFull=Open
•
TP—High-capacity top position sensor
•
passThru—High-capacity pass thru sensor
•
Full—High-capacity bin full sensor (lower part of dual sensor)
•
NearFull—High-capacity bin near full sensor (upper part of dual sensor)
3.
Manually actuate each of the sensors of the high-capacity stacker, and the display by each sensor toggles
from Open to Closed .
4.
Press
Back
( ) o r
Stop
( ) to exit the test.
Sensor Tests (5-bin mailbox)
1.
Select
Sensor Tests
from OUTPUT BIN TESTS.
2.
Select
Output Bin x
(
x
=number of the output option to be tested).
The following screen is displayed:
Output Bin
x
P1=OP P2=OP L=NL
•
passThru—5-bin mailbox pass thru sensor shows Open or Closed
•
mailboxEmpty—5-bin mailbox empty sensor shows
Normal
for a normal level,
NearFull
for nearly full,
and Full for full.
3.
Manually actuate each of the sensors of the 5-bin mailbox,. The pass thru sensor will indicate Open or
Closed and the empty sensor (mailboxEmpty) indicates Normal, NearFull, or Full.
4.
Press
Back
( ) o r
Stop
( ) to exit the test.
Diverter Test
This test verifies the functioning of each of the 5-bin mailbox output media diverters. If more than one 5-bin
mailbox is installed, all installed diverters or tested.
To run the Diverter Test, select
Diverter Test
from the OUTPUT BIN TESTS. The test runs once and stops.