Dell 3250, Руководство по эксплуатации продукта

Страница: 185 / 240

185
Removing DIMMs
CAUTIONS
Use extreme care when removing DIMMs. Too much pressure can damage
the connector. Apply only enough pressure on the plastic ejector levers to
release the DIMM.
DIMMs must be removed and added in groups of four, referred to as a row.
1. Power down the system by pressing and holding the power button on the front panel for several
seconds.
2. Unplug both AC power cords to remove standby power from the server.
3. See the warnings and cautions under Removing and Installing the Top Cover.
4. Follow the instructions under Removing the Top Cover.
5. Remove the PCI riser card assembly. For instructions, see Removing the PCI Riser Assembly.
6. Gently push the plastic ejector levers out and down to eject the DIMM from its connector. See
Figure 65.
7. Hold the DIMM only by its upper edges, being careful not to touch its components or gold edge
connectors. Carefully lift it away from the connector and store it in an antistatic package.
8. Repeat steps 6 and 7 for each DIMM you want to remove.
9. If you are not installing new DIMMs, follow the instructions under Installing the Top Cover.
Otherwise, continue with Installing DIMMs.
Figure 65. Removing DIMMs