Dell 3250, Руководство по эксплуатации продукта

Страница: 151 / 240

151
Text Command Format
Text commands do not support the bridging and sequence number fields present in the hex-ASCII
commands, are case sensitive, and are preceded by a prefix consisting of the string
SYS
.
Examples
Hex-ASCII command example (IPMI Reset Watchdog Cmd):
[18 00 22]<CR>
[1C 00 22 00]<CR-LF>
Text command example:
[SYS TMODE]<CR>
[OK TMODE]<CR-LF>
Terminal Mode IPMI Message Bridging
Terminal mode supports the ability to bridge IPMI messages to another interface when binary
hex-ASCII IPMI commands are used. The message bridge is determined by the following:
•
The bridge field
•
Whether the message is a request or a response
•
The message direction with respect to the BMC and the LUN.
Table 25 lists the supported BMC combinations for IPMI message bridging. Table 26 lists the
terminal mode commands and Table 27 lists the terminal mode configuration. No other
combinations are supported. IPMI messages to and from the system interface are transferred using
the BMC SMS (System Management Software) LUN, 10b, and with the bridge field set to 00b.
Table 25. Supported BMC Combinations for IPMI Message Bridging
Bridge
Field Request/
Response Message
Direction (to BMC)
LUN Message
Interpretation
00b Request In 00b,
01b,
11b Remote Console request to BMC functionality
Message is a request from the remote console to
the BMC
00b Response Out 00b,
01b,
11b Response to Remote Console from BMC
functionality Message is a response to an earlier
request from the remote console to the BMC
00b Request In 10b Remote Console request to SMS Message is a
request from the remote console to SMS via the
Receive Message Queue
00b Response Out 10b SMS Response to Remote Console Message is a
response to an earlier request from SMS
01b Response Out Any Response to earlier Bridged Request from Remote
Console Message is the asynchronous response
from an earlier bridged request that was
encapsulated in a Send Message command issued
to the BMC by the remote console