Dell EMC PowerEdge XE2420, Инструкция по установке и обслуживанию

Страница: 57 / 173

Next steps
Replace the bezel filter .
Installing the filter inside the front bezel cover
This topic shows the removal of filter front bezel cover.
Prerequisites
1. Follow the safety guidelines listed in the Safety instruction .
2. Remove the front bezel cover.
Steps
1. Keeping the filter parallel to the bezel, insert the filter inside the bezel cover.
2. Push the filter inside the bezel until it is locked on both the sides.
NOTE: Filter is a consumable part. Based on a disciplined maintenance calendar in a controlled indoor environments
like data centers or switching offices, it is recommended to change filters three to four times a year. You can
contact sales team for filter kits that are available for replacing filters.
Figure 30. Bezel filter installation
Next steps
Install the front bezel cover .
Removing the bezel tray
This topic shows the removal of front bezel cover.
Prerequisites
1. Follow the safety guidelines listed in the Safety instruction .
2. If locked, unlock the bezel tray from the server chassis.
3. Unplug the front accessible cables and remove them out of the openings.
Steps
1. Loosen the four thumbscrews on the right and the left side of the bezel tray.
2. Pull the bezel tray out of the chassis.
Installing and removing system components 57