Dell EMC PowerEdge XE2420, Инструкция по установке и обслуживанию, Страница: 11 / 173

Table 1. Front view of 2 x 2.5-inch drive system (continued)
Item Ports, panels, and slots Icon Description
12 iDRAC9 dedicated port Enables you to remotely access
iDRAC. For more information,
see the iDRAC User’s Guide at
www.dell.com/idracmanuals
13 VGA port Enables you to connect a display
device to the system. For more
information, see the
Technical
specifications section.
14 System status indicator cable
port N/A Enables you to connect the
status indicator cable and view
system status when the CMA is
installed.
15 System identification button The System Identification (ID)
button is available on the front
to identify a system in a rack by
turning on the system ID button
to reset iDRAC and to access
BIOS using the step through
mode.
For more information about the ports, see the Technical Specifications section.
Figure 2. Front view of 4 x 2.5-inch drive system
Table 2. Front view of 4 x 2.5-inch drive system
Item Ports, panels, and slots Icon Description
1 Serial port IOIOI Enables you to connect a serial
device to the system. For more
information, see the
Technical
specifications section.
2 Drive slots (2,3) N/A Enable you to install drives that
are supported on your system.
For more information about
drives, see
Technical
specifications section.
3 GPU riser 2 slots N/A The GPU card slot (riser 2)
connects up to two full-height
GPUs. For more information,
see the
Expansion card
installation guidelines section.
4 Drive slots (0,1) N/A Enable you to install drives that
are supported on your system.
For more information about
PowerEdge XE2420 system overview 11