manualshive.com logo in svg

Dell EMC PowerEdge R7525, Инструкция по установке и обслуживанию, Страница: 73 / 209

Поделиться
Скачать
Dell EMC PowerEdge R7525 Скачать руководство пользователя страница 73

Figure 44. Removing the drive from the drive carrier

Next steps

Install the drive into the drive carrier

.

Installing the drive into the drive carrier

Prerequisites

1. Follow the safety guidelines listed in the 

Safety instructions

 on page 46.

2. If installed, 

remove the front bezel

.

3.

Remove the drive blank

.

Steps

1. Insert the drive into the drive carrier with the drive connector facing towards the rear of the carrier.
2. Align the screw holes on the drive with the screws holes on the drive carrier.
3. Using a Phillips #1 screwdriver, secure the drive to the drive carrier with the screws.

NOTE:

 When installing a drive into the drive carrier, ensure that the screws are torqued to 4 lbf-in.

Installing and removing system components

73

Содержание PowerEdge R7525


















































































































































































































Отзывы:

Нет отзывов