Table 3. Description of values for parameters
Description
Valid for Parameter
Absolute Path to Firmware File
Indicates the absolute filepath to a valid
drive or EMM firmware file
Valid value for the
–file
parameter
Adapter Index
Indicates the enumerated index value for
installed supported HBAs
Valid value for the
-a
parameter
SAS WWID
Indicates the device specific SAS WWID of
the installed supported HBAs
Valid value for the
-a
parameter
Device ID
Enumerated reference value that Indicates a
target drive or EMM
Valid value for the
-d
and
-emm
parameters
Drawer Index
Indicates reference value for logical grouping
of drives into drawers
Valid value for the
-w
parameter
Encl Index (Enclosure Index)
Indicates reference value for enclosures
attached to a specified adapter
Valid value for the
-enc
parameter
WWN (Worldwide Name)
Indicates unique value that identifies a
unique drive, EMM, or enclosure
Valid value for the
-d
,
-emm
, and
-enc
parameters
Enclosure Slot Index
Reference value that Indicates a target drive Valid value for the
-d
and
-s
parameter
Drawer Slot Index
Indicates reference value for a drive slot in a
specified drawer
Valid value for the
-d
parameter
EMM Index (Enclosure Management Module
Index)
Indicates the reference value for EMMs in an
specific enclosure
Valid value for the
-emm
parameter
StartDate
Starting date to view logs in the format:
MM/DD/YY
Valid value for the
-startDate
parameter
EndDate
End date to view logs in the format:
MM/DD/YY
Valid value for the
-endDate
parameter
EventType
Type of event to view (INFO, CRITICAL,
ERROR, or WARN)
Valid value for the
-event
parameter
LatestEventCount
Numeric value between 1–1000
Valid value for the
-count
parameter
SupportedOutputFormats
Supported out file formats: XML, JSON
Valid value for the
-outputformat
parameter
Serial Number
Unique identifier for the physical disk drive.
Valid value for the
-d
parameter
Drive OS Path
Unique path to drive provided by the OS.
Valid value for the
-d
parameter
NOTE:
Ensure the console window is able to fit at least 150 characters for each line to view the output properly.
NOTE:
The output screenshots shown in the following procedures are examples and may be slightly different from the actual
output depending on the version of your Server Hardware Management Software.
Command help
To get a list of all available commands:
16
SHM CLI
