manualshive.com logo in svg

Dell EMC Data Domain DD6300, Руководство по установке

Поделиться
Скачать
Dell EMC Data Domain DD6300 Скачать руководство пользователя страница 3

5

7

Planning and Site Preparation

9

Tools and supplies needed...........................................................................10
Safety information...................................................................................... 10
Field-installed systems vs. factory-racked systems..................................... 11

Install the System in the Rack

13

Unpack the system..................................................................................... 14
Rails and cable management assembly........................................................14
Identify the rack location to install the system............................................ 15
Install the rails.............................................................................................15
Install the system into a rack....................................................................... 17
Installing the cable management assembly..................................................19
Installing the expansion shelves into the racks........................................... 20

Connect Cables and Power On

23

Connecting ES30 shelves........................................................................... 24

DD6300 with ES30 cabling............................................................ 24

Connecting DS60 shelves........................................................................... 27

DD6300 with DS60 cabling............................................................ 27

Installing the front bezel............................................................................. 28
Connect data cables................................................................................... 29
Power on all systems.................................................................................. 29

Configure System for Use

31

Enable administrative communication.........................................................32
Accepting the End User License Agreement...............................................33
Run the configuration wizard......................................................................33

Configuring the network................................................................ 33
Configuring additional system parameters.....................................35

Figures

Tables

Chapter 1

Chapter 2

Chapter 3

Chapter 4

CONTENTS

Data Domain DD6300 System

  

Installation Guide

3

Содержание Data Domain DD6300





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды