Delitek Waste Compactors – user -/service manual-rev 1.2
DT-200i “Green Ship” Waste Compactor – standard versions 15
3.0 USING HD PLASTIC BAGS IN THE CONTAINER
3.1 Plastic bags
The DT-200i waste compactor is designed for compacting waste in our
heavy duty plastic bags. The bags are custom made for the C-200
container. Avoid deploying sharp objects (metal/ glass etc.) when using
HD plastic bags. This may damage the bag.
In order to have the possibility to segregate the waste according to
MARPOL 73/78- annex V guidelines, it is recommended to have a
system consisting of two or more containers.
Recommended segregations are:
1) Mixed waste (mixed consumer waste)
2) Metal/aluminum (tins, soda boxes and other metal boxes)
3) Plastic, PVC
4) Paper/cardboard
Special category waste, glass and waste that belongs in the hazardous waste category must
never be deployed in the waste compactor.
The HD Plastic bags are specially designed for the C-200 containers and can be ordered
from Delitek AS. See chapter 8.0 for ordering information.
WARNING:
Always use original HD Plastic bags from Delitek AS. Delitek AS takes no responsibility for
damages or injuries caused by use of unoriginal bags or bags not intended for our machines.
3.2 Installing the HD Plastic bag in the container
Take one bag from your onboard stock and unfold it. Place the plastic bag in the container and
fold the upper part over the top edge of the container. Let there be a 10~20 cm border on the
outside of the container. Use the standard strap (3 meter) that was included in the delivery and
strap the bag firmly in the upper edge of the container (see fig. 16). This is necessary in order to
prevent the plastic bag from being dragged down into the container during operation.
The container is now ready for use.
Figure 16. HD Plastic bag in C-200 container
