Features
Specifications
EEPROM for extended event logs OR regional languages
Yes
CANbus Engine Interface
Yes
RS-485 Interface for Modbus
Yes
DC battery supply voltage (with -32 V reverse protection)
8 to 28 V
Operating temperature range
-20 to 65 °C
Protection class with gasket (included)
IP65
Warning auto clear enable/disable
Yes
Fuel reference selection input
Yes
On the fly mode change when engine is healthy/engine off
Yes
Analogue 0-5 V input for Speed bias input for E-gov from Load sharing module
Yes*
E-gov actuator output
Yes*
*Note: SGC 121 only.
1.4 Passwords
The controller is protected from set-up changes with a four digit password.
There are two password levels:
Level
Access
Factory setting
1
Full access (read and write)
0123
2
Limited access (read)
1234
The passwords can be changed on the controller:
1. Go to Configuration mode.
2. Log on with password level 1.
3. Use the
Up
and
Down
buttons to go to Misc Settings, select with the Start
button.
4. Use the
Up
and
Down
buttons to go to the password to be changed, select with the Start
button.
5. Use the
Up
and
Down
buttons to choose the first digit for the new password, select with the Start
button.
6. Repeat for the next three digits.
7. When all four digits are chosen, the display shows
PASSWORD 1
Password changed
USER MANUAL 4189341226A UK
Page 5 of 72
