DEI PCX-7420 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 32

DEI PCX-7420 Скачать руководство пользователя страница 24

Page

24

of

32

For more information:

970.493.1901 or

[email protected]

Document #7650-0004 Rev C2. © Copyright 2019 Directed Energy, Inc. All rights reserved.

Command Set

These are all of the commands and queries that the PCX-7420 supports via
remote RS232, USB, and Ethernet control. Commands and queries must be in all
capital letters. Commands and queries that require data, denoted as n, must have
a space between the command and the data.

The PCX-7420 expects “\n” to be the end line character of commands and queries.
The responses to the user’s computer are also terminated with “\n”. For every
command sent to the PCX-7420, the PCX-7420 sends a response. The user’s
software must wait for a response before sending another command to avoid an
overflow of the PCX-7420 receive buffer.

The commands are in alphabetical order except *LIST?. In the examples, the
command or query is in black; the response is in blue italics.

*LIST?

Lists all commands and queries supported by the PCX-7420. Example:

*LIST?

*IDN?

*SAVE

*RECALL

OUTPUT?

OUTPUT:ENABLE

OUTPUT:DISABLE
TRIG?

TRIG:INTERNAL

TRIG:EXTERNAL

TRIG:EXT:TERM?

TRIG:EXT:TERM

TRIG:INT:FREQ?

TRIG:INT:FREQ

TRIG:INT:MAIN:PULSEWIDTH?
TRIG:INT:MAIN:PULSEWIDTH

TRIG:INT:BIAS:PULSEWIDTH?

TRIG:INT:BIAS:PULSEWIDTH

MAIN:CURRENT:SETPOINT?

MAIN:CURRENT:SETPOINT

BIAS:CURRENT:SETPOINT?

BIAS:CURRENT:SETPOINT

STATUS:KEYSWITCH?

STATUS:REAR:ENABLE?
TEMP:IN?

TEMP:EXHAUST?

FAULT?

FAULT:CLEAR:ALL

«
...
22
23
24
25
26
...
»

Содержание PCX-7420

































Отзывы:

Нет отзывов