8
©
1999 Directed Electronics, Inc.
To program a timed activation:
1. Press
two times. Release. Press again and hold for 3
seconds.
2. The clock icon will light and activation number "1" will flash.
Press
to scroll through the timed activation numbers
(1-4). When you've made your selection, press
. The
clock icon and the selected activation number (1-4) will
remain lit throughout the programming.
3. The hour indicator will begin flashing. Press
to adjust
the hour in one-digit increments (1-12 for standard time, 1-
24 for military time). When the desired hour appears on the
display, press
.
4. The minute indicator will begin flashing. Press
to
adjust the minutes in one-digit increments (0-59) or hold
down
to increase scrolling speed. When you've made
your selection, press
.
5. The AM/PM indicator will begin flashing. Press
to tog-
gle between AM and PM settings. When you've made your
selection, press
.
6. The ONCE/WEEK indicator will begin flashing. Press
to
toggle between the ONCE and WEEK settings. When you've
made your selection, press
.
If you selected ONCE in Step 6, go to Step 7a in the following One-Time
Activation section. If you selected WEEK in Step 6, skip to Step 7b in the
Weekly Activation section.
