DEHACO IBEX 1200GS Скачать руководство пользователя страница 9

Страница: 9 / 40

1. Safety instructions

1.13 Modifications to the IBEX breaker,

precautions

WARNING!

Changes to the IBEX breaker or the adapter plate

may lead to serious injury.

Never carry out any changes to the hydraulic

attachment or the adapter plate.

Only use original parts or accessories approved by

Dehaco.

Modifications that entail new hazards may require

a new procedure for assessing conformity.

Changes to the hydraulic attachment.

1.14 Environmental pollution,

precautions

NOTE

Hydraulic oil is permanently environmentally

harmful. Escaped hydraulic oil will lead to

groundwater and soil contamination. Organisms may

die.

Collect any hydraulic oil which escapes to avoid

environmental pollution. For minor volumes use

an absorbing medium (in case of an emergency

use soil). In case of major leakages contain the

hydraulic oil. It must not drain off and penetrate

the ground or enter the water table or water

supplies.

Collect contaminated absorbing medium or soil in a

watertight box/container and close it tight.

Contact an authorized waste management

company.

Dispose of all contaminated material in accordance

with the applicable environmental regulations.

1.15 Guarantee terms and conditions

New IBEX breakers supplied by Dehaco B.V. have a

guarantee period of 12 calendar months.

The IBEX breakers are guaranteed against material or

production faults for the duration of the guarantee

period (Manufacturers Guarantee), subject to the

following terms and conditions.

The IBEX breaker must be installed and commissioned

by Dehaco BV or an approved dealer. The guarantee

period will commence from the date that the IBEX

breaker was dispatched.

The faulty components that fall under the guarantee

become the property of Dehaco B.V. These must be

kept available for Dehaco BV and should be returned

immediately, complete and unmodified.

A guarantee claim will only be considered when a

written claim has been registered with Dehaco BV

or an approved dealer. The damage or malfunction

should be registered within 24 hours of the first

occurrence.

All claims must contain the following information:

◊ The serial number.

◊ The type of carrier that the machine has been

mounted on.

◊ A description of the damage or malfunction.

◊ Photos of the damage (where applicable), carrier

and situation.

◊ A copy of the delivery receipt and invoice of the

IBEX breaker.

After the fault has been determined Dehaco BV, or

the approved dealer can give the owner permission to

perform certain repairs. If these repairs fall under the

conditions of the guarantee the required components

will be delivered free of charge. If permission is

not given to perform the repair yourself then the

IBEX breaker should be returned to Dehaco BV or

an approved dealer for repair or modifications. The

repairs that will be undertaken will be performed free

of charge. Whereas the transport and/or call-out costs

to and from Dehaco BV or an approved dealer are not

covered.

Dehaco B.V. is not liable for the consequential damage

or losses caused by a defective IBEX breaker. This

includes consequential excavator/carrier damage,

consequential damage or losses due to stoppage of

the excavator/ carrier or work).

Excluded from the guarantee

◊ Damage caused by improper installation or

commissioning of the IBEX breaker, excavator/

carrier or the hydraulic system.

◊ Damage caused by improper or neglected

maintenance and transport damage.

◊ Damage or failures that can be traced to faulty

repairs/maintenance and/or performed by

unauthorized third parties.

◊ Damage that can be traced to the incorrect

execution of preventative maintenance such as

regular lubrication.

◊ Damage or failure to components that are subject

to wear such as chisels and bushes.

◊ Consequential damage caused by the failure to

replace these wearing parts when required.

If damaged or failed components are replaced with

non-original parts the entire guarantee expires.

Содержание IBEX 1200GS









































Результаты поиска

Содержание IBEX 1200GS

Отзывы:

Похожие инструкции для IBEX 1200GS

Бренды по названию

Популярные бренды

DEHACO IBEX 1200GS, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание IBEX 1200GS

Отзывы:

Похожие инструкции для IBEX 1200GS

Бренды по названию

Популярные бренды