DEHACO IBEX 1200GS Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 40

background image

13

© 2018 Dehaco B.V. • Operation and maintenance manual IBEX Hydraulic breakers G-type – Version 17-08-2018

3. Transport

3. TRANSPORT

WARNING!

The IBEX breaker is heavy. A falling or tipping forklift

and/or breaker can cause injury or damage to

people or the surrounding area.

Ø

Transport the IBEX breaker using only machinery

and accessories with the correct loading capacity.

Ø

Ensure that nobody is within the working area or

route when transporting the IBEX breaker.

3.1 Transport using an excavator or

crane

The lifting eye that is integral to the IBEX breakers

housing should be used for lifting or relocating. This

should be performed using a chain or cable that is

suitable for the particular breaker. The breaker should

never be lifted using the tool or adapter plate.

3.2 Transport using a forklift

◊ Choose a forklift that is capable of making the lift.

◊ Ensure that the forks are adjusted to a suitable

width before attempting to lift the breaker.

◊ Place the forks under the housing of the breaker

so that the weight is evenly distributed.

◊ Carefully lift the breaker and once stable transport

the breaker. It is possible that the breaker is much

wider than the forklift. Take care to assess the

surrounding area for obstacles before attempting

to transport the breaker.

◊ Extra attention should be given when driving with

a breaker. The material of the breaker is naturally

slippery when on the fork, and there is a greater

chance of it shifting whilst in motion.

◊ For extra information and tips read the operation

manual of the forklift and pay attention to the

lifting table included.

3.3 Transport using a van or truck

◊ It is advised, and in some regions mandatory to

place the IBEX breaker on an antislip mat whilst on

transport.

◊ The breaker should be securely fastened during

transport. The use of lashing straps to fix the

breaker in place so that it cannot shift is strongly

advised.

◊ It is advised to fasten the breaker so that is cannot

shift in any direction transport.

◊ The tool should always face the backside of the

vehicle.

«
...
11
12
13
14
15
...
»

Содержание IBEX 1200GS









































Отзывы:

Нет отзывов

Похожие инструкции для IBEX 1200GS

Бренд: Makita Страницы: 4

Бренд: Makita Страницы: 5

Бренд: Makita Страницы: 3

Бренд: Makita Страницы: 12

Бренд: Makita Страницы: 3

Бренд: Makita Страницы: 3

Бренд: Makita Страницы: 3

Бренд: Makita Страницы: 16

Бренд: Makita Страницы: 2

Бренд: Makita Страницы: 2

Бренд: Makita Страницы: 13

Бренд: Eastwood Страницы: 3

Бренд: Eastwood Страницы: 8

Бренд: Eastwood Страницы: 12

Бренд: Eastwood Страницы: 4

Бренд: Eastwood Страницы: 12

Current Loop Supply M3LDY

Бренд: M-system Страницы: 6

Бренд: MACROZA Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды