DEHACO IBEX 1200GS, Руководство по эксплуатации и обслуживанию

Страница: 24 / 40

24 Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) •
✆
+31 (0)252 - 41 79 50 •  info@dehaco.nl • www.dehaco.nl
6. Maintenance
6.8 Wear limits for parts
6.8.1 Wear limit for tool and tool bushing
1) The normal clearance between the tool and its
bushing varies per model. Using the table below
the exact figures can be seen for every model.
2) Regular inspections are advised of both tool and
tool bushes. If the tool or either of these bushes
have reached the wear limit they should be
immediately replaced to prevent unnecessary
damage occurring to other parts of the breaker.
Max. wear
Check wear at surface
Wear limit
Upper bushing
(1)
Tool
(2)
Tool bushing
(3)
New Reject New Reject New Reject
IBEX 130GS
4 mm - - 44,5 mm 42,5 mm 44,5 mm 46,5 mm
IBEX 135GS
4 mm - - 40 mm 38 mm 40 mm 42 mm
IBEX 170GS
4 mm - - 53 mm 51 mm 53 mm 55 mm
IBEX 200GS
4 mm - - 59,5 mm 57,5 mm 59,5 mm 61,5 mm
IBEX 320GS
4 mm 68 mm 70 mm 68 mm 66 mm 70 mm 68 mm
IBEX 400GS
4 mm 75 mm 77 mm 74,5 mm 72,5 mm 74,5 mm 76,5 mm
IBEX 600GS
4 mm 85 mm 88 mm 85 mm 82 mm 85 mm 88 mm
IBEX 900GS
5 mm 100 mm 102,5 mm 100 mm 96,5 mm 100 mm 102,5 mm
IBEX 1200GS
6 mm 120 mm 123 mm 120 mm 117 mm 120 mm 123 mm
IBEX 1800GS
6 mm 135 mm 140 mm 135 mm 133 mm 135 mm 140 mm
IBEX 2200GS
6 mm 150 mm 153 mm 150 mm 147 mm 150 mm 156 mm
IBEX 2800GS
6 mm 153 mm 156 mm 153 mm 150 mm 153 mm 156 mm
IBEX 3200GS
6 mm 160 mm 166 mm 160 mm 157 mm 160 mm 166 mm
IBEX 4000GS
6 mm 180 mm 183 mm 180 mm 177 mm 180 mm 183 mm