Degelman PRO-TILL 10, Руководство оператора и каталог запасных частей

Страница: 11 / 35

-5-
142766 - PRO-TILL 10|13 (10-February-2022)
1. Read and understand ALL the information in
the Operator’s Manual regarding procedures
and SAFETY when operating the PRO-TILL in the
field/yard or on the road.
2. Check with local authorities regarding machine
transport on public roads. Obey all applicable
laws and regulations.
3. Always travel at a safe speed. Use caution when
making corners or meeting traffic.
4. Make sure the SMV (Slow Moving Vehicle) sign,
and all the lights and reflectors that are required
by the local highway and transport authorities
are in place, are clean and can be seen clearly
by all overtaking and oncoming traffic. Be
sure to check with local highway authorities
and comply with their lighting and transport
requirements.
5. Keep to the right and yield the right-of-way to
allow faster traffic to pass. Drive on the road
shoulder, if permitted by law.
6. Always use hazard warning flashers on tractor
when transporting unless prohibited by law.
TRANSPORT SAFETY
Use the following guidelines while transporting:
1. Fully extend roller cylinder for transport.
2. Ensure debris that may fall or become dislodged
during transport is removed.
3. Be sure hazard lights are flashing and SMV
decal is visible.
4. Keep brake pedals locked together at all times.
(Refer to tractor manual.)
5. Look up 3-point anti-sway stabilizer system on
tractor.
IMPORTANT
:
Under NO
CIRCUMSTANCES should there
ever be riders while the Pro-Till
is in transport.
TRANSPORTING
RIDERS
Transport
TRANSPORT TO FIELD POSITION
A. Remove 3-point cylinder locks on tractor
(if equipped).
B. Lower unit.
C. Adjust depth.
FOLLOW PROCEDURE BELOW:
FIELD TO TRANSPORT POSITION
A. Raise unit.
B. Block off cylinders with locks (if equipped).
C. Fully lower roller during transport
(i.e. Fully extend cylinder).
FOLLOW PROCEDURE BELOW: