Defender PHOENIX1, Инструкция по эксплуатации

Страница: 9 / 26

PHOENIX1
5 PHOENIX1
INSTALLATION
INSTALLING THE CAMERA (TRANSMITTER)
1. Decide whether the camera will be wall-mounted or sit on a desk/
tabletop. If wall mounting, use the included mounting hardware. The
camera can be adjusted for either mounting scenario by rotating/
adjusting the camera to the required position.
Desk Mounted
Camera
2. Connect the AC power adapter to the camera. Make sure that the camera is positioned less than 6 ½ feet (the power
cord is only 6 ½ feet in length) from a power adapter and connect the power plug to the outlet.
The camera installation is now complete!
Note: If you are using an additional camera (not included) you will need to have one camera set to channel 1 and the
other set to channel 2. For more information, see “Installing an Additional Camera”, below
INSTALLING AN ADDITIONAL CAMERA
The PHOENIX1 is designed to work with up to two cameras, allowing you to effectively monitor more than one area
at a time. If you are using an additional camera (not included) they will need to be set on different channels. The
PHOENIX1 is set by default to operate with one camera. If you will be using two cameras, follow the instructions on
next page.