Defender PHOENIX1, Инструкция по эксплуатации

Страница: 15 / 26

PHOENIX1
11 PHOENIX1
SCAN MODE
Pressing the SCAN button places the system in scan mode. Use scan mode if you do not wish to watch
continuous video with sound but want to be alerted if there are any sound disturbances in the area
you are monitoring. To disable this alert, turn down the
(audio sensitivity) dial on the side of
the monitor by pushing the dial down all the way.
1. Press the SCAN button. You will hear an audible beep and then the screen will go blank. The
camera is now scanning active cameras. The screen will stay black until the camera detects sound
above the desired sound trigger level.
Use manual mode if you want to view continuous video with sound. You will also
be alerted if there are any sound disturbances in the area you are monitoring. If
you are using more than one camera, you will be able to choose which camera to
view, and how long you wish to view it.
1. Press the M button. The monitor will display video and audio from your monitoring location.
2. If the camera detects sound above the desired sound trigger level, the monitor will beep and will display video
and sound from your monitoring location. The Channel 1 or Channel 2 indicator light will also turn on to let you
know where your video is coming from.
3. IF USING TWO CAMERAS: pressing M will display video and audio from Camera 2. If you wish to
view video from camera 1, press the M button again. You will see the Camera 1 indicator light
switch on and you will see video from camera 1 on your LCD screen. You can switch back and
forth between cameras at any time by pressing the M button.