Defender PHOENIX1, Инструкция по эксплуатации

Страница: 10 / 26

PHOENIX1
6 PHOENIX1
SETTING THE CAMERA CHANNELS
1. Verify the camera’s channel setting by verifying the DIP switch settings. To do this, unscrew the front part of the
camera to open the lens cover and adjust the DIP switches. PHOENIX1 cameras are set by default to Channel 1.
2. Use a pen or pointed object to flip the DIP switches up or down according to the image below. Make sure that one
camera is set to the Channel 1 position and the other camera is set to the Channel 2 position.
3. Accordingly, the DIP switch located on the bottom of the monitor should be adjusted to reflect the use of multiple
channels. The monitor will be set by default to channel 1 only. To be able to view both cameras you need to adjust
the DIP switches on the bottom of the monitor to reflect all channels in use.
4. Use a pen or pointed object to flip the DIP switches
down according to the image (right). This way the
monitor will be able to display video from both cam-
eras.
Note: This is very small and may be hard to see. Appropriate lighting needed