DeDietrich HPI S, Руководство пользователя

Страница: 20 / 44

2. Set the following parameters:
Tab.14
Parameter Description
Start date holiday Set the date and time for the start of the absence period.
End date holiday Set the date and time for the end of the absence period.
Wished room temperature during holiday Set the desired room temperature for the absence period
Reset Restart or cancel the holiday programme
4.5 Regional and ergonomic parameters
You can personalise your appliance by modifying the parameters linked to
your geographic location and the ergonomics of the control panel.
1. Press the key.
2. Select System Settings.
3. Carry out one of the following operations:
Tab.15
Menu Description
Set Date and Time Setting the date and time
Select Country and Language Select the country and language.
Daylight Saving Time
Setting the automatic change to daylight saving time. These changes will be carried out on the
last Sunday in March and October
Installer Details Display the installer details
Cost calculation Enter the tariffs for the energy used
Set Heating Activity Names Modify the name of activities used to program heating periods
Set Cooling Activity Names Modify the name of activities used to program cooling periods
Set Screen Brightness Setting the screen brightness
Set click sound Switch the sound of the rotary knob on or off
Firmware Update Function not available
License Information Display the creation licenses for the internal software
4.6 Personalising the zones
4.6.1 Definition of the term "zone"
Term given to the different hydraulic circuits (CIRCA, CIRCB). It indicates
several rooms served by the same circuit.
Tab.16 Example:
Key Zone Factory-set name
1
Zone 1 CIRCA
2
Zone 2 CIRCB
4.6.2 Changing the name and symbol of a zone
The name and symbol for a zone are factory-set as shown in the
appendix. If you desire, you can personalise the name and symbol of the
zones in your installation.
On
Fig.4
1
MW-1001145-2
2
4 Operation
20 MIT-S 7684505 - v03 - 14052020