Dedicated Micros SD Range страница 43 Скачать руководство пользователя

Страница: 43 / 76

SD Range

Serial

This page allows configuration of the two Serial ports on the rear of the unit. For installation

information, refer to ‘Installing the SD DVR’.

Serial Port 1/2/3/4

Select the serial port to be edited

Function

Each serial port can be Disabled, set to Debug (serial

communications), Text in Image, or a number of supported

telemetry products.

Mode, Baud Rate, Parity, Data Bits, Stop Bits

This allows the communication settings to be configured.

Note:

When a telemetry protocol is selected these settings will be set to the default to pre-

determined values for the protocol, and should not normally be altered manually.

Main (Red)

This button will navigate to the Main page.

Camera (Green)

This button will navigate to the Camera settings page.

Cancel (Purple)

Settings are automatically saved when the page is closed. Use

this button to cancel any changes before navigating away from

the page.

Save

To ‘manually’ save changes whilst in a menu page, select the

Save button.

6.6

Содержание SD Range













































































Результаты поиска

Содержание SD Range

Отзывы:

Похожие инструкции для SD Range

Бренды по названию

Популярные бренды

Dedicated Micros SD Range, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SD Range

Отзывы:

Похожие инструкции для SD Range

Бренды по названию

Популярные бренды