Dedicated Micros SD Range, Инструкция по установке и эксплуатации

Страница: 40 / 76

Dedicated Micros ©2007
0
SD Range
Activity Grid
The alarm detection area can be edited via the Activity Grid. The Activity Grid can be used to
exclude areas where there may be continuous movement (i.e. trees or bushes) which lead to
false triggers. The camera view can be overlaid by a grid of up to 16x16 cells. Each cell can be
individually enabled or disabled.
Select a camera via the Activity Detection screen, then select the Edit Grid option (Red Softkey).
Use the up/down/left/right Directional buttons to navigate between cells. To add cells, press the OK
button on an area of the image that does not presently contain any cells. A cell will be added. Use
the Directional buttons to add more cells. When the required number of cells have been added,
press the OK button again. If cells need to be removed, highlight a cell and press the OK button.
Use the Directional buttons to move around the image deleting other cells. Press the OK button
when all required cells have been deleted. If only a small area of the camera view may be subject
to false triggers. Use the Default_grid feature (Yellow Softkey) to fill the screen with a full 16x16 cell
grid, then highlight the required cell(s) to be removed via the OK button.
Activity (Red) This button will navigate back to the Activity settings page.
Clear cells (Green) This button will clear all entered cells.
Default grid (Yellow) This button will insert a default square of 16 x 16 cells across the
displayed video image.
Cancel (Purple) Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
Save To ‘manually’ save changes whilst in a menu page, select the
Save button.