Decon wheel e-drive plus, Руководство пользователя

Страница: 59 / 115

52
Q To change the direction of movement
or to turn.
• Operate with the
handgrips.
• Descend in reverse
to avoid the risk of
plunging forward.
Q To descend a slope
Q Getting up a curb
• Move the wheelchair
close to a curb at a
right angle, and then,
while gently stepping
on the tipping plate
on the anti-tip device
as if pushing it
forward, pull the
“handgrips” down
and rearward to raise
the casters.
• Turn off the power
switch, and stow
the anti-tip device
to get up a high
curb.
After getting up the
curb, be sure to
lower the safety
wheels on the
anti-tip device.
Q Getting up a high curb
Perform the following operations after turning off the power and switching the clutches
to the manual position.
(3) Adjust the speed as necessary.
Turn the speed adjustment dial clockwise to increase speed, and
counterclockwise to decrease speed.
In the beginning, adjust it to a low speed. Gradually adjust the
speed after you become accustomed to the operation.
The speed can be adjusted steplessly within the range of 1.1 to
4.9 km/h forward and 0.4 to 1.9 km/h backward.
(4) Release the parking brakes.
(5) Push the Forward (or Reverse) switch to start moving.
Releasing the Forward (or Reverse) switch stops the wheel-
chair.
Securely grip the handgrips.
To change the direction of motion or to turn around, operate
using the “handgrips”.
To change the position and angle of the assistant controller, refer
to page 93.
Slow Fast
Basic Operations