background image

53

TIP

 If the power does not turn on

Is the power for the controller turned on?
If the power for the controller is turned on, the power for the assistant controller 
will not turn on.
In this case, turn off the power switches on both controllers, and turn on the power 
for the assistant controller.

TIP

 The battery residual capacity lamp does not turn on

If the warning lamp is lit or flashing, it means that the bat-
tery has run out.
If the warning lamp turns on immediately after replacing the 
battery with a fully charged battery, and the wheelchair does 
not move, there may be a malfunction in the unit.
Contact your dealer.

TIP

 If the buzzer sounds and the wheelchair does not move

Are you pushing the operation button with one or both of the left and right clutch 
levers in the manual position?
This is a buzzer to warn you that the clutch has been disengaged. (Beeps “Pi Pi, 
Pi Pi, Pi Pi”)
Turn the power off, switch both of the left and right clutch levers to power drive 
position, and turn the power back on.

On or flashing

Содержание e-drive plus




















































































































Отзывы: