Decon wheel e-drive plus, Руководство пользователя

Страница: 49 / 115

42
4.2. Moving the Wheelchair
(1) Turn on the power switch (yellow).
When the power to the wheelchair is turned on, all the lamps on the controller illuminate.
Then, after 1 second, the “retracted anti-tip device” warning lamp turns off, and the bat-
tery residual capacity indicator indicates the battery level.
When the battery residual capacity becomes less than 10%, the residual capacity lamp
flashes, and a short buzzer beeps “Pi Pi Pi Pi” 4 times.
Battery residual capacity indicator
Battery residual capacity warning:
(2) If necessary, adjust the maximum speed.
For the adjustment method, refer to 4.3. Adjusting and
Confirming the Maximum Speed.
(3) Release the parking brakes.
(4) The wheelchair starts moving with you tilt the joystick to
the desired direction.
Make sure that the joystick returns to its neutral position
and the wheelchair stops properly when you release the
joystick.
For beginners, refer to pages 47 and 48, and practice the
basic operations until you become familiar with them.
Power switch
(yellow) Speed selector
switch (black)
“Retracted anti-tip device”
warning lamp Battery residual
capacity indicator
After 1
second
Fully charged Empty
Battery residual
capacity warning