Decon wheel e-drive plus, Руководство пользователя

Страница: 93 / 115

86
5
Pull each power unit to ensure that it will not
come off.
6
Place the power units in their normal position,
and then apply the parking brakes.
7
Remove the cap from the connector on
the left wheel.
8
Align the white dot (arrow mark) on the
connector at the end of the cable with
the white dot on the connector on the
wheel side, and then push in the cable
connector until it clicks.
C onnect the cable with an L mark to
the connector with an L mark (on the
w h e e l s i d e ) , a n d c o n n e c t t h e c a b l e
with an R mark to the connector with
an R mark (on the wheel side).
9
Make sure that the connector will not
be disconnected.
White dot
White dot
Cap
Connector
(on the cable side)
Connector
(on the wheel side)
4
Push in each power unit completely. Check to
ensure that the two balls “a” on the end of the
axle can be seen completely.
a
NOTICE
O
When you install the right wheel on models that feature an integrated battery,
support the battery storage compartment to prevent the wheel from turning. Oth-
erwise, the wheel might turn, possibly causing damage to the switch or the battery
storage compartment.