DEC PORTswitch 900FP, Руководство по установке и настройке

Страница: 75 / 124

Description of Menu Options
Configuring the Module 3–39
[7] Configure Out-of-Band Port (Cont.)
[1] Set Port Speed
This option prompts you to select the speed of your OBM port.
_____________________________ Note ________________________
This option is operational only when the module is in standalone
mode (when it is installed into a DEChub ONE).
_______________________________________________________________
The OBM port speed that you select must match the speed of your OBM
device. The port speed must be the same at each end of the communications
link.
The factory default for this option is 9600.
Example of Dialog
The following example shows the dialog associated with this option:
=========================================================
Enter selection : 1
PORTswitch 900FP
=========================================================
SET OUT-OF-BAND MANAGEMENT INTERFACE PORT SPEED
[1] 2400 baud
[2] 9600 baud
[3] 19200 baud
[4] 38400 baud
=========================================================
Enter selection number [2] (9600) : 4 <Return>
OBM port speed set.
Press <Return> for Main Menu ...