DEC PORTswitch 900FP, Руководство по установке и настройке

Страница: 24 / 124

Module Components
1–6 PORTswitch 900FP Description
Back Panel
Table 1-2 describes the back-panel components that are illustrated in
Figure 1-2.
Table 1-2: Back Panel Components
Item Name Description
1 Locking tab Locks the module into a DEChub 900
backplane or into the DEChub ONE
docking station. It also contains the hot-
swap switch lever.
2 48-pin connector Provides network and power connections to
the module when the module is installed
into a DEChub 900 or a DEChub ONE
docking station.
3 Grounding bolt Provides a chassis grounding connection
between the module and a DEChub 900 or
DEChub ONE docking station.
4 Manufacturing
label Lists the module part number, serial
number, revision level, and power
requirements.
5 160-pin connector Provides network and power connections to
the module when the module is installed
into a DEChub 900 or DEChub ONE
docking station.
6 Mounting tab Secures the module to the backplane when
the module is installed into a DEChub 900
or DEChub ONE docking station.
7 Grounding fingers Provides additional chassis grounding
between the module and a DEChub 900 or
DEChub ONE docking station.
8 Address label Contains the module's 48-bit Ethernet
hardware address.