Dean Super Runner 38 Series Скачать руководство пользователя страница 2

Страница: 2 / 20

This product has been certified as commercial cooking equipment and must be

installed by professional personnel as specified.

Please read all sections of this manual and retain for future reference.

Installation, maintenance and repairs should be performed by your

local Dean Factory Authorized Service Agency.

INSTRUCTIONS TO BE FOLLOWED IN CASE THE USER SMELLS GAS

ARE TO BE

POSTED IN A PROMINENT LOCATION.

THIS INFORMATION SHALL

BE OBTAINED BY CONTACTING THE LOCAL GAS

COMPANY OR GAS SUPPLIER.

FOR YOUR SAFETY, DO NOT STORE OR USE GASOLINE OR

OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY

OF THIS OR ANY OTHER GAS APPLIANCE.

IMPORTANT

SAFE AND SATISFACTORY OPERATION OF YOUR EQUIPMENT DEPENDS

ON ITS PROPER INSTALLATION.

INSTALLATION MUST CONFORM WITH LOCAL CODES, OR IN THE ABSENCE

OF LOCAL CODES, WITH THE NATIONAL FUEL GAS CODE, ANSI Z223.1,

NATURAL GAS INSTALLATION CODE CAN/CGA-B149.1, OR THE PROPANE

INSTALLATION CODE, CAN/CGA-B149.2.

Содержание Super Runner 38 Series





















Результаты поиска

Содержание Super Runner 38 Series

Отзывы:

Похожие инструкции для Super Runner 38 Series

Бренды по названию

Популярные бренды

Dean Super Runner 38 Series, Руководство по установке и эксплуатации

Результаты поиска

Содержание Super Runner 38 Series

Отзывы:

Похожие инструкции для Super Runner 38 Series

Бренды по названию

Популярные бренды