background image

15

6.4

 

COMBINATION GAS VALVE:

Combination Gas

Valve

Is combination

gas valve manual knob

in the "OPEN"

position?

Turn the manual

knob "OFF".

Is a gas

cut-off valve present

between fryer and store's

incoming gas supply

line?

Check the gas

cut-off valve.

Is the gas cut-off

valve in the "OPEN"

position?

Are there any

other gas appliances

along this same gas supply line

between the cut-off valve and

the fryer?

Are any of

these other gas

appliance currently

working?

Problem is either in the

non-functional fryer or is in

the gas supply line near

the non-functioning fryer.

Contact your local

authorized Dean

servicer.

Contact your local

authorized Dean

servicer or local gas

supplier.

Turn the gas

cut-off valve

"OFF".

Turn the gas

cut-off valve to the

"OPEN" position.

Turn the fryer's

combination gas

valve manual knob to

"OPEN".

Problem is either in

the fryer or in the

incoming gas supply

line.

Contact your local

authorized Dean

servicer for

assistance!

Turn the manual

knob to the

"OPEN" position.

Attempt to

re-light the pilot.

Does the

pilot light?

Does pilot

remain lit when gas cock

manual knob is

released?

Check pilot flame
size and stability.

Go to page 14 and

follow flowchart "Pilot

Flame Adjustment".

Problem may be

a faulty

thermocouple.

Go to page 13 and

follow flowchart

"Set-Up".

Problem is either a

faulty pilot, gas valve,

or blockage in the gas

supply lines.

Contact your local

authorized Dean

servicer.

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Содержание Super Runner 38 Series





















Отзывы: