De Agostini Model Space C57, Руководство пользователя

Страница: 19 / 19

84
2 3
4 5
Align the holes in
the joint plate with
the holes in the left
firebox half.
The four holes are the locations for the
fusible plugs. Apply synthetic rubber
adhesive around the hole on the right on
the inside of the firebox half.
The two circled holes in the firebox
half are the locations for the handrail
brackets. Insert the first bracket into
the hole as indicated.
Repeat this process for the remaining
three plugs.
Apply a drop of synthetic rubber
adhesive to the end of the bracket,
and then tighten a nut onto it.
Fit the second handrail bracket
in the same way. Before the
glue dries, make sure the holes
are aligned.
Align the circled
holes of the firebox
half with those of
the safety valve base
and boiler joint.
Tighten a 2 x 3mm
screw into the two
circled holes in the
firebox.
Tighten a 2 x 3mm
screw into the holes
in the firebox.
Apply instant adhesive to the
contact area between the plugs and
the inside of the firebox half.
Place the
first plug
into the hole,
positioned as
shown.
Instant adhesive
Complete