De Agostini Model Space C57, Руководство пользователя

Страница: 14 / 19

79
2
4 5
3
Apply epoxy adhesive to the underside of
the lip of the safety valve. Make sure the
hole is facing to the right of the boiler half,
then lower the valve into the circled hole.
Prepare two handrail brackets which
fit into the two circled holes in the
smokebox, and two nuts which go
with the brackets.
Lower the
upper boiler
half onto the
lower boiler
half, aligninig
the holes of
both parts.
Tighten a 2 ×
3mm screw into
the four circled
holes on either
side of the
boiler.
Remove the screws
holding the boiler
joint in position.
Apply some synthetic
rubber adhesive to the
threaded part of the
handrail brackets and then
insert them into the two
circled holes and secure
with two nuts.
Apply synthetic rubber
adhesive to the step
(highlighted) on the
superheater header
(Stage 32), and place it
into the boiler joint.
Align the holes of the handrail brackets
before the adhesive dries.
Fit another two
handrail brackets
on the other side
of the smokebox.
Epoxy
adhesive
Boiler joint
Hold this way up
Synthetic rubber adhesive
Upper boiler half
Lower boiler half
Align at the front
Tap the four holes in the sides of the
joint (circles) with 2 × 3mm screws.