De Agostini Model Space C57, Руководство пользователя

Страница: 13 / 19

Step by step: Stage
Tools
Where your parts fit
78
34
The boiler 2
1
Locate the six holes on the left and right
of the boiler upper half. Prepare six
handrail brackets and six nuts.
Insert a handrail bracket into
one of the holes.
Fit the remaining five handrail brackets
to the other holes of the boiler upper
half. Before the adhesive dries, make
sure that the holes in the brackets are
aligned, as indicated by the red lines.
Apply some synthetic rubber adhesive
to the inside of the boiler half at the
base of the bracket, and tighten a nut
onto the end of it.
Boiler upper half
Water supply pipe
Safety valve
Handrail brackets × 10
Screws (2 × 4mm) × 5
Screws (2 × 3mm) × 13
Nuts (M2) × 10
Phillips screwdriver
Epoxy adhesive
Synthetic rubber adhesive
Tweezers
Toothpick
Boiler top Safety valve
Your parts