De Agostini Model Space C57, Руководство пользователя

Страница: 10 / 19

75
2
4
3
Turn the lever
onto the handle
as far as it will go.
Insert the end of the
smokebox handle into the
hole in the lever.
Pass the end of the handle into
the hole in the centre of the
smokebox door.
Apply some epoxy adhesive to
the end of the handle. Place the
lock onto the end of the handle.
Adjust the position of the
lock to match the one
shown above.
Apply synthetic
rubber adhesive
to the ends of
the two brackets
holding handrail
B, and insert them
into the two holes
(circled).
Place three
brackets on
handrail A, and
two onto handrail
B, as shown.
Move handrail
B through the
brackets and apply
synthetic rubber
adhesive to the
points where the
brackets were. Then
move the handrail
back into position.
When the lever is rotated
the lock on the inside of the
smokebox turns in the hole
in the centre of the lock bar,
holding the door shut.
Fit handrail A and the
three brackets in the
same way as B. Remove
any excess adhesive from
the rails and brackets.
Epoxy adhesive
Complete